desktop housing (D*W*H) 140 * 172 * 96mm
power supply from 83 ... 264VAC, 50 / 60Hz

Data sheets :
A212U mit USB Schnittstelle
A212U with USB Interface

Suitable measurement data acquisition :
X - Link direct Graph
The 2 channel force / displacement measuring amplifier A212U with 3.2" touch TFT display
is a small measuring amplifier in an aluminium desktop housing. It is powered from mains voltage.

It supports a force channel (strain gauge - full bridge) and a displacement channel (TTL incremental), but can also be operated with a rotary sensor (TTL incremental) or a reflective sensor for rpm determination.
Up to 8 measured values can be displayed. The buttons can be used to tare or reset the peak values, for example.

The measuring amplifier supports linear multi-point scaling or polynomial scaling with 4 constants. Interface USB 2.0 with a synchronous data transfer rate between 0.625..1200Hz selectable, or asynchronous measured value request.
force / displacement measurements with incremental sensors
measuring of bridge output voltage ratio [mV/V/]
linear multi-point scaling with 11 points, or
polynomial with 4 constants
rpm​​ and angle measurements with rotary sensors
torque / rpm measurements with reflective sensors
handy case available for use in the field

Supports strain gauge full bridges in 6 - wire technology
accuracy class 0.02%
bridge supply voltage 5V DC

Selectable output channels
gross / net / tare - channel (user scaled)
positive / negative peak memory (user scaled)
measurement value [mV/V]
at linear mode :
   displacement, speed, acceleration
at rotary mode :
   rpm, acceleration
   number of turns, rotation angle in °, oder °,',"
at reflective mode :
   measuring range 0.6...20'000min⁻¹, State

8pcs.of limit switch pairs choosabel to the output channels

Contact

  • Trachsler Electronics GmbH
  • Haslistrasse 12a
    8554 Wigoltingen - Häusern
    Schweiz
  • +41 44 970 31 65
  • info@trachsler-electronics.ch